Is your Hisense TV stuck in reboot loop issue? And you can’t use the main interface? No worries. Power cycle or Reset your Hisense TV to fix the Hisense TV Reboot loop.
Undoubtedly, it’s frustrating when your TV gets stuck on the Hisense Logo Screen or keeps restarting. Many users encounter this problem when they reboot the TV or accidentally unplug it.
In today’s guide, I will introduce you to multiple effective solutions to fix the problem. But before moving towards solutions, it is important to know the causes behind this issue.
So I will explain some possible reasons and then the solutions. Here are some effective solutions to fix the TV stuck on logo reboot loop problem. I will elaborate on each solution. Read and follow the guide to fix your TV.
Why Is Hisense TV Stuck In The Reboot Loop?
Your Hisense TV may get stuck in a reboot loop for various reasons. The following is a list of the reasons.
- Software Glitch
- Corrupted System Files
- Incompatible Apps or Updates
- Hardware Problem
- Power Issues
1. Software Glitch
A software glitch can cause the Hisense TV reboot loop problem. It leads to the reboot loop problem by disrupting the normal operating system of the TV’s software or boot-up process.
Hisense TV encounters software issues due to corrupted system files, incompatible software updates, or any TV operating system error.
Due to these errors, the TV attempts an automatic reboot to fix the software glitch. The TV keeps rebooting to address the software problem until it is not addressed.
2. Corrupted System Files
Corrupted System Files also lead to reboot loops due to a disruptive boot-up process, just like software glitches cause the rebooting problem.
It happens because once the TV starts, it relies on multiple files to proceed and initiate its operating system. When the system files are corrupted, the TV creates a loop and restarts repeatedly to resolve the problem.
3. Incompatible Apps or Updates
If you Install Incompatible Apps or Updates, the conflict between the TV’s operating System and the Incompatible Apps leads to the reboot loop issue.
The incompatible apps or updates cause memory leaks or crashes, which eventually cause reboot problems.
4. Hardware Problem
Any damaged or faulty Hardware component leads to the Hisense TV reboot loop issue.
A faulty power supply, an overheated CPU, a defective motherboard, and malfunctioning memory modules can trigger disruptive operating systems. Then, the disrupted operating system causes the TV to restart continuously.
5. Power Issues
Interruptive and fluctuating power supplies are the most probable reasons for the Hisense TV reboot loop issue. The damaged or faulty power supply disrupts the power flow, which confuses the internal processing system.
The disturbed internal processing system of your TV, and try rebooting the TV repeatedly to resolve the problem. In this way, it leads to the Hisense TV reboot loop issue.
How To Fix Hisense TV Stuck In Boot Loop: Try 13 Effective Fixes Quickly.
Once you have addressed the reason for the Boot loop issue with your Hisense TV, it’s time to start resolving your problem. So, the following are 13 effective methods to help you solve the reboot loop problem with your Hisense TV.
1. Power Cycle Your Hisense TV
A quick and efficient repair for the logo screen issue is to power cycle your Hisense TV. Follow the given steps to power cycle your Hisense TV:
- Power off your Hisense TV.
- Unplug your TV from the main power source and all other cables.
- Wait for a few minutes, around 3-5.
- Plug all the unplugged cables back into the TV.
- Turn on the TV and check if the issue is fixed or not.
2. Power Cycle Your Router
Try power cycling your router to see if that clears up any connectivity difficulties. Network-related issues can be resolved, and a seamless connection between your TV and the internet is ensured by restarting the router.
Follow the following steps to power cycle your Router.
- Unplug the router from the power source.
- Wait for around 30-60 seconds.
- Let it drain all its power.
- Pug it back into the power source after a few seconds (30-60).
- Now turn it ON and check if the issue is resolved or not.
3. Replace Faulty Capacitors
Faulty capacitors on the main board can also be why the Hisense TV is still stuck on the logo screen. Replace the defective capacitors with the same rating to fix the issue.
- Disconnect the TV for 30 seconds to discharge the capacitors safely.
- Open the back cover of your TV.
- Locate the defective capacitors.
- Use a soldering iron to remove the defective capacitor carefully.
- Replace the defective capacitors with new ones.
4. Perform A Factory Reset On Your Hisense Smart TV
| Remember |
|---|
| A factory reset will erase all loaded apps and customize setups, returning your TV to its factory default settings. Before continuing, make sure to back up any crucial data. |
You can perform a factory reset on your Hisense TV to return it to its factory default settings. This may assist in resolving Hisense TV stuck on logo screen issues. Follow the given steps to reset your Hisense TV.
- Go to “Settings” on your TV.
- Open “System Settings” and locate the “Advance Settings” option.
- Select the “Advance Settings” option.
- Now, you will see another list of options.
- Find and select “Factory Reset,” and then confirm the selection.
Watch Video To Hard Reset Hisense Smart TV
5. Install the Latest Firmware
Firmware is essential software for the proper functioning of your TV. The boot loop issue on your Hisense TV can be fixed by updating the firmware.
Before Installing the latest firmware version, ensure the firmware version is compatible with the model of your TV. To install the latest Firmware version, follow the given steps:
- Go to the Hisense website and Download the latest firmware version on your computer or Laptop.
- Copy the Downloaded Firmware version onto a USB drive.
- Turn Off your TV and insert the USB drive into the TV’s USB port.
- Now, follow the on-screen instructions.
| Note! |
|---|
| Ensure a less interrupted and stable power supply during the Firmware updating process to avoid inconvenience. |
6. Reconnect All the Connections
Try reconnecting all connectors on your Hisense TV to see if that stops the boot loop issue. Switch off the TV and unhook all wires, including the HDMI and power cables.
Additionally, turn off your Wi-Fi router. Before plugging everything back in, give it a moment.
Reattach the cables to the appropriate ports and turn the TV back on. Verify that the problem has been resolved. This straightforward technique might resolve the boot loop, which a loose connection can occasionally cause.
7. Hardware Damage
Your Hisense TV may have hardware damage if you’ve attempted all the software-related remedies, but it’s still stuck in the boot loop.
The mainboard, the T-Con board, or the power supply could all be broken. If your TV is still under warranty, getting professional assistance from a TV mechanic or contacting Hisense support is recommended.
Self-help hardware repair attempts can be dangerous and sometimes harmful. A skilled technician can identify the issue and offer suitable recommendations to get your TV working again.
8. Check The Power Supply Of Your Hisense Smart TV
Your Hisense Smart TV’s power supply should be checked. Ensure the TV and power outlet are properly connected to the power wire. Instead of using extension cords or surge protectors, plug the TV straight into a wall outlet.
Ensure that the power cable is free of damage. Continue with additional troubleshooting procedures to find the root of the boot loop if the power supply is functioning properly.
Consult a qualified expert for examination and repair if you suspect a power supply problem.
9. Reset The Hisense TV Remote Control Batteries
Resetting the remote control batteries will free up a Hisense TV stuck in a boot loop to reset the Hisense TV remote control batteries and remove them from the remote.
After removing the remote’s batteries, press and hold the power button for 15 seconds. Put the batteries back in and turn the TV on.
If the problem persists, try using fresh remote battery packs. Resetting the Hisense remote batteries can fix remote-related issues that cause the boot loop. If the boot loop still occurs, try other troubleshooting techniques or contact an expert.
10. Reconnect Your TV to Network
Try reconnecting your network to your Hisense Smart TV to see if it stops the Hisense TV from getting stuck on the logo reboot loop. Verify that your Wi-Fi router is operating properly, and restart it if required.
To temporarily disconnect, access the TV’s administrative panel and block the appliance. Turn on the TV and reconnect it to your network briefly.
This straightforward approach might assist in resolving network-related issues that could result in the logo screen freezing. If the issue still exists, you can try other troubleshooting techniques to locate and fix the problem.
11. Uninstalling Unknown Applications
Remove any recently installed unauthorized software if your Hisense TV encounters a reboot loop issue. The freezing issue could be caused by bugs or incompatibilities in these apps with the TV’s operating system.
To uninstall the Unknown application, follow the steps below.
- Find the unauthorized software.
- Go to “Settings”.
- Now, Find the “Uninstall” option in the app area. Select “Uninstall.”
12. Contact Hisense Roku TV Support
If none of the above techniques work and your Hisense Roku TV stays stuck on the logo screen, it’s time to contact Hisense Roku TV support.
Call 1-888-935-8880 to access their official helpline. When you describe the issue, they will offer suggestions and potential solutions.
They might provide repair services or a replacement if the warranty covers your TV. Contacting customer service is essential for receiving specialized assistance for your TV model and issue.
Why does the Hisense TV Logo Come on and then turn off?
The Hisense TV logo comes on, then turns off due to a faulty power supply. It might be due to internal Hardware problems, such as the mainboard. Repair or replace the internal hardware to fix the issue. In addition, you can contact Hisense Customer Support for further guidance.
Why the Hisense TV is Stuck On Software Update?
Your Hisense TV gets stuck on a software update for certain reasons, including slow internet connections, Insufficient storage, or any error during the update process.
Restart your TV, Ensure a stable internal connection, or free up some space if required. These troubleshooting techniques can assist you in resolving the issue.
How To Stop Hisense TV Loading Circle?
Try the steps below to stop the loading circle on a Hisense TV.
- Ensure a stable and secure internet connection.
- Power cycle the TV. Unplug the TV from the main socket, wait 2-3 minutes, and plug the TV back in.
- Update the TV’s outdated firmware if there are any available updates.
Conclusion
Following the abovementioned methods, you can fix the reboot issue in Hisense TV. However, sometimes you may be unable to fix this issue; in that case, calling a professional for help can be a good decision.
Ultimately, you can contact Hisense TV customer support for more discussion. Join the Hisense TV communities and share your issue there; other people will come to help you.
However, with this guide, if you’ve fixed the problem, share your experience in the comment section.
Related Articles:
- Hisense TV Chromecast Not Working – 7 Easy Ways to Fix
- How to Fix “Hisense TV No Sound” Problem? Try My Solutions
- How Long Do OLED TVs Last? Lifespan Explained
My hisense tv had downloaded the required os update then installed and rebooted. then it got stuck in a power cycle constantly rebooting. I tried the factory reset button on the back of the tv. I tried unplugging the tv and waiting 10 minutes. I reset the internet modem. Nothing seems to work. Any ideas?
I’ll suggest you to contact customer support, or hire a technician as it may have technical issue.